Furniture Polishing Service

by admin

PROFESSIONAL Furniture Polishing Services (Wooden Doors, Cabinets, Table, Chairs & Outdoor Furniture’s)

Wood Polish Categories

The two main categories of wood polish are surface polish and penetrating wood polish. As the names suggest, the former is for the surface of the wood and the latter is oil-based and penetrates the composition of the wood.

Wood polishes can be water-based or oil-based. The advantage of water-based polish is that it works on all types of wood surfaces. It dries quickly and lends a natural appearance to the polished wood. A point to note is that water-based finishes need expert and experienced hands, or else the surface may show brush marks and look shabby.

Oil-based finishes take time to dry, so that can be inconvenient for some, but they lend a luxurious finish to the wood.

Types of Wood Polish

The different types of wood polish are:

Melamine polish

It just takes 20 minutes for the polish to dry and makes the wood non-breathable as it closes all the pores on the wood. When you apply melamine polish, it will look like a thin film-like coating on the surface as it consists of melamine resin. Melamine polish makes the wood glossy.


  • Melamine Polish is quite durable and retains the gloss for years.
  • It also offers good scratch and heat resistance. Apt for your furniture, it protects them for long.

Polyurethane or PU Polish

While Polyurethane polish is available as both oil-based and water-based finishes.  Both types of polishes are hard and durable and thus protect the wood from multiple types of degradation, ranging from corrosion, abrasion to weathering. They are also available in a wide range of finishes, including matte, satin and glossy. The only major difference between the two is that the water-based polish dries faster.


  • Being a strong finish, PU polishing offers a tough coat, offering super protection to the wood. Hence, it is suitable for surfaces that undergo maximum wear and tear, for example, wooden flooring.
  • They also have high scratch, stain and heat resistance.

Lacquer finish

A protective coating that may also contain colour pigments, the lacquer finish is helpful in lending richness to the wood. They are usually sprayed directly onto the wooden surface.


  • It dries fast and offers a hard protective coating to the surface, thus protecting it from water and also acids.
  • Super effective, lacquer finish can do its job with just a single coat.
  • Different sheens are available, making it perfect for your wooden furniture and flooring.

Lamination Polish

Also known as PolyResin Polish, lamination polish creates a glossy finish to the wooden surface. Since many chemicals are used in the polish, lamination polish is the most expensive of all polishes. It can lend either a natural finish or a coloured finish to the wood.

Pros: Due to multiple coats, the lamination polish lends a thick coating to the surface. The hardness of the resin makes the wood more durable.

Tips to remember for a neat wood polishing job

  • It is preferable to work outside, even on your balcony. If working inside your home, open the windows to allow ventilation.
  • Clean the surface first to remove dirt and dust.
  • Use quality tools for wood polishing. Invest in a good quality brush. Use a natural bristle brush if you are using oil-based finishes but a synthetic brush works best for water-based finishes.
  • Remove the excess wax build-up first. Wipe down the furniture or the wooden surface with a dry cloth. Test the polish on a small area and then continue the rest of the job.
  • Use a readymade wax remover to wipe down the surface, or you can make a solvent with half cup vinegar and half cup water.
  • Use polish sparingly, or else you will have to spend a lot of time removing the excess polish.
  • It will take 15-20 minutes for the surface to absorb polish. Later, wipe off the excess product using a dry cloth.
error: Content is protected !!